TurnMaster Pack of Three Cutters - Tungsten Carbide

A pack of three of the most popular cutters in hard-wearing tungsten carbide. The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode.
Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance.
Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material.
Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide
Related Products:
These cutters are designed specifically for the TurnMaster

For more information:

  • Read more about the features and benefits of Robert Sorby TurnMaster

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives

  Browse Catalogue

Code Description/Type Catalogue Page No. Catalogue Ref.
RSTM-CT123 Pack of Round, Detail Point and Square Tungsten Carbide Cutter 12 RSTM-CT123