TurnMaster Mushroom Cutter - High Speed Steel (HSS)

As the name suggests this cutter is designed for undercutting mushroom shapes, but is also ideal for hollowing out small forms.
Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material.
Sharpens to: 0.2-0.4 microns Hardness: 62 RC Material: M2 HSS
Related Products:
These cutters are designed specifically for the TurnMaster

For more information:

  • Read more about the features and benefits of Robert Sorby TurnMaster

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives

  Browse Catalogue

Code Material Catalogue Page No. Catalogue Ref.
RSTM-TIP7 HIgh Speed Steel† 13 RSTM-TIP7