TurnMaster French Curve - High Speed Steel (HSS)

This high speed steel cutter is perfect for scraping or shear scraping inside forms. Ideally suited for that finishing cut on egg cups, goblets, bowls and round bottom boxes.
Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material.
Sharpens to: 0.2-0.4 microns Hardness: 62 RC Material: M2 HSS
Related Products:
These cutters are designed specifically for the TurnMaster

For more information:

  • Read more about the features and benefits of Robert Sorby TurnMaster

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives

  Browse Catalogue

Code Material Catalogue Page No. Catalogue Ref.
RSTM-TIP4 HIgh Speed Steel† 13 RSTM-TIP4