TurnMaster Detail Point Cutter - High Speed Steel (HSS)

This cutter is perfect for roughing down square stock to round and is therefore ideal for spindle work. As its name suggests its fine point also allows for fine detail on bowls and spindles. Shear scraping with this cutter is NOT recommended. Made with M2 HSS these popular cutters offer excellent sharpness while delivering Robert Sorby HSS reliability.
Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material.
Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS
Related Products:
These cutters are designed specifically for the TurnMaster

For more information:

  • Read more about the features and benefits of Robert Sorby TurnMaster

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives

  Browse Catalogue

Code Material Catalogue Page No. Catalogue Ref.
RSTM-TIP2 HIgh Speed Steel† 13 RSTM-TIP2