This is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. Manufactured with the highest quality micro grade tungsten carbide this cutter will provide incredible durability and endurance.
Switch the TurnMaster into shear scraping mode and this cutter also delivers an extremely fine finish that requires little or no sanding.
Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material.
Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide
These cutters are designed specifically for the TurnMaster
For more information:
- Read more about the features and benefits of Robert Sorby TurnMaster
- Download our sharpening guide here
- Watch the Robert Sorby film on sharpening hints and tips
- Look at our guide to sharpening abrasives