Excelsior Side End Swivel Tip – Titanium Nitride Coated (TIN) High Speed Steel

The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. TIN coating provides additional wear resistance increasing the lifetime of the cutter.
This cutter is also available in high speed steel
Use a diamond file or honing stone around the profile of the cutter. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel.
Related Products:
This cutter is designed for use with the following tools:

  • Multi-tip Hollowing Tool (RS200KT and RS200)

  • RS 2000 Deep Hollowing System

  • Swivel Tip Probe (8803H)

For more information:

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives

  Browse Catalogue

Code Description/Type Catalogue Page No. Catalogue Ref.
RS212GC Excelsior Side/End Swivel Tip 24 RS212GC