Bullet Cutter – High Speed Steel

The Robert Sorby Bullet Cutter is designed for the rapid removal of waste material when using either of two popular tools – the Swan Neck and Swivel Tip tools. Used in combination with the Ball End Cutter (RS233C) for developing hollow forms.
Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel.
Related Products:
This cutter is designed for use with the following tools:

  • Swan Neck Hollowing Tool (859H)

  • Swivel Tip Probe (8802H

For more information:

  • Download our sharpening guide here

  • Watch the Robert Sorby film on sharpening hints and tips

  • Look at our guide to sharpening abrasives