Taming the skew is perhaps the most common of problems encountered by the woodturner. The digs-ins which ensue from incorrect presentation cause many turners to avoid using the skew chisels and consequently reduce their skills and limit their opportunities of turning between centres. The new Spindlemaster does away with this problem. Its design is flat on one surface, and oval on the other makes dig-ins a thing of the past. It is easy to use for even the least experienced turner. In addition to doing the regular planing job of the skew chisel, the Spindlemaster will also cut both beads and coves with the greatest ease. Because of its design - the wood is almost polished and so it gives a fine finish every time. That is a particular advantage when working on soft woods like pine which normally leaves a very coarse finish. The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer. It is also available in micro size for those miniature or small projects like finials, pens, lace bobbins. Full instructions included. Featured in "Robert Sorby Specialist Tools - Part 1". Useful Tip: The Spindlemaster is one of the easiest tools to sharpen. Simply hone on the top face. Do not touch the polished bevel – unless it has been damaged.

Since it's introduction, the Spindlemaster has become the favourite tool of many turners. That is not surprising when you consider it's advantages - it has no corners to dig in, it planes, beads, coves and trims end grain, and it's polished bevel gives a superb finish from the tool especially on softer woods.
Now this micro version has been introduced with all the same advantages. That makes it ideal for those specialising in miniature work, bobbin makers and pen turners. It also features in the new 36HS pen turning set.