Used on bowls and spindle work to create smooth flowing curves e.g goblets, egg cups, and inside boxes.

For finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, eg diamond point.

The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an agressive cut, whilst retaining the butterfly sensitivity for the refining cuts.

The special cutting profile of this new scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and the flat bottomed vessles. The profiles cause this to be very responsive and sensitive in use.

Designed for blending the parallel side wall and the curved bottom of vessels together. It is excellent for undercutting the rims of small bowls.

Used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time.

All blades 1 1/2" (38mm) by 3/8" (10mm) section except 8003 - 3/4" (19mm) by 3/8" (10mm). Massive in section, these were designed to reduce vibration and be stable in use. Because of their shear bulk (overall length between 21 1/2" - 546 and 572mm) these scrapers can be used with large overhang form the tool rest. Excellent for large bowl work, platters and deep hollowing.